I’m frequently asked if I teach classes. People come into my cheery studio full of shiny, colourful paintings and feel a creative spark. Although I have taught children’s classes, I’ve never taught adults and I don’t think I’d been good. I’m from the “Do 100 more paintings and see if that helps” school of art.
So this tutorial is the closest I’ll ever come to teaching. I was contacted by the lovely—and very patient—Rebecca Zak about getting some Art Resin in exchange for posting a project. Since I already use Art Resin, I quickly agreed—then took months to post this tutorial. Sorry, Rebecca!
I’m a huge proponent of mistakes in art. While I will show you the steps I took, the best art occur when you mess up or things don’t turn out as planned. Feel free to do things differently or make substitutions. Art is improvisational—at least that’s what I tell myself when I screw up yet again.
Here are the materials I used:
8” x 8” wood panels
black acrylic ink
alcohol inks: pink & yellow
resin dyes: pink, yellow, red
Additional supplies: rubbing alcohol, drinking straw, protective gloves, stir sticks, blow torch, mask, plastic containers.
Step One: Prep your surface
Take a wood panel and tape the sides to protect them. Then trowel on gesso as smoothly as possible. I let it dry, sand the surface, and then reapply gesso. And I repeat about six times to achieve a beautiful soft surface. I’m sure that some of you are ready to bail already. Six times, Mary Anne? That’s going to take a week! Do whatever works for you, two coats may be enough. I like drawing on a glossy surface so this is what I do.
Step Two: Create your drawing
I was originally thinking about a Valentines project (which shows how long I’ve been working on this!) so I chose lace as my motif. I took a piece of lace and painstakingly drew all the twisty thready details in black ink. And then, guess what happened? I accidentally smeared the ink over my delicate drawing! Ack. But you know what? That mistake animated the drawing. It brought contrast and form to my rendering. So I deliberately smeared the next one too. That’s exactly what I mean about the best art coming from errors!
Step Three: Add alcohol ink.
Okay, once your black ink drawing has dried, it’s time to add some alcohol ink. In this case, I’m using a limited palette of pink and yellow, so I chose pink ink. I sprayed rubbing alcohol on the surface of the painting and then added drops of ink. I used a straw to blow the ink around the surface. What you’re trying to achieve is a very loose, fluid form. Keep in mind that you want to leave some white space on your painting. To achieve colour depth, let the ink dry and then apply another layer. This is a good place to fool around and have some fun.
Step Four: Apply coloured resin.
Once the ink has dried completely, it’s resin fun time! Rest the panel on a container so excess resin can drip off the sides. Use a level to make sure your panel is even, otherwise gravity will pull the resin to one side. Since I use different types of resin, I wear a respirator and gloves each time I use resin. A well-ventilated room is important too. For further resin tips, check out the Art Resin website.
Mix up your resin (the quantity depends on the size of your panel, but estimate about half of what you would need to cover the whole panel.) Mix the resin well, and then add yellow colourant.
To colour my resin. I use a transparent tint which I get from my industrial resin supplier Fibertek. Unfortunately, it’s not yet available for online purchase. An alternative is a very small quantity of Art Resin Neon Yellow resin dye. Don’t use too much or it becomes opaque. Add a few drops at a time and mix well. Another suggestion is a very small amount of acrylic paint. I tried alcohol ink, but the colour is too pale.
Mix the colour in well, and then pour resin on your panel in a loose composition. Go slowly because it’s harder to remove than add. (Although, you can scrape off excess resin with a spatula. I know, because I’ve made ever possible mistake with resin.) What you’re aiming to see at the end is some original pink, some yellow, and best of all a gorgeous orange where they overlap. One caution, Art Resin is very liquid, so it continues to spread while it sets. Many times, I’ve left resin shaped like a donut only to find the donut hole gone when it’s set. Donut becomes cookie!
Once you’re happy with your composition, use a blow torch or heat gun to get rid of the bubbles in the resin. This is also the time to closely examine your resin surface for errant specks or fibres which you can easily remove. I use an old X-ACTO knife.
After allowing your resin to set, you have to decide if you’re happy with the composition. Since my personal art philosophy is More is Better, I thought this painting needed more layers. This time, I mixed up pink transparent resin and applied it on top of the dried yellow layer.
Step Five: Final resin coat.
Once I’m happy with coloured resin layers and they have set, I add a top coat of clear resin. This step is optional, because some prefer the look of multilayered paintings. However I have found that white gesso marks easily, so for smaller works like this that can get handled, I put a clear coat on top.
Of course, coming from the More is More school of art, I would never make only one painting at a time. In this case, I made six paintings in the lace theme. If you’re going to all the work of mixing resin, it only makes sense to resin more than one work at a time. I used yellow alcohol ink on half, and pink on the other half. You can see that they’re elevated to allow for resin drips.
As well as drawings, I used relief prints of lacy objects and a silver doily for background images. I used pink ink and yellow ink for the second layer, and then the opposite colour for the resin layer. I also added glitter to one. For a closer look, you can see them on my website, in my shop. There’s a magnifying feature so you can see all the details.
This project isn’t too complicated, but it requires you to loosen up and develop a critical eye. Does the painting look good now or does it need more? (My answer: more.) Think about negative spaces, those places you’re leaving white. Enjoy the new colours created when you layer one transparent colour over another. Most of all, relax and make mistakes because that’s when the best art happens!